Bones Bearings Cleaning Unit Bearing Cleaner
Bones Bearings Cleaning Unit Bearing Cleaner

Bones Bones Bearings Cleaning Unit Bearing Cleaner

VAT 21% included
In stock
  • Free delivery from €50 - Free returns
  • Customers rate us 9,6/10
  • Order before 4pm, same day shipping


With the Bones Bearings Cleaning Unit Bearing Cleaner you can easily clean your bearings and make them roll like new. This Bones bearing cleaner contains a white container with steel rod and spacers. There is also an extensive instruction manual so you can get started right away. Cleaning skateboard ball bearings is easy.


  • Made from a High Quality Polyethylene plastic
  • 7 Spacers give plenty of room to flush your ball bearings easily
  • The cap is attached to the rod for easy use
  • All types of skate bearings can be cleaned with this
  • Excluding bearings, speed cream and cleaning fluid (not included)


  • White container with twist-off cap
  • Metal rod with 8 spacers to separate bearings
  • Extensive instructions

Cleaning your skateboard bearings:

1. Remove the rubber shields using a pin or needle.
2. Take a mineral or citrus degreaser or Acetone and fill the Bones Bearings Cleaning Unit to 1/3rd.
3. Take your bearings and place them on the axle with a spacer in between each time, tighten the bolt and cap securely.
4. Shake the bottle for about 30 seconds and repeat if necessary.
5. Remove the bearings from the shaft and dry them with a clean cloth.
6. Once the bearings are clean, it's time to lubricate them. The best way to do this is to use 2 drops of Bones Speed Cream per bearing.